Rubber granulator is specially designed for rubber granulation in the rubber recycling line as the third step process. The first and second steps were able to shred the tires into 10-20mm rubber chips, and then the granulator could further grind them into 1-7mm rubber crumb.
The Waste Tire Recycling Line is mainly used for crushing steel wire tires, radial tires and various rubber products or trims into rubber granules or rubber crumbs with required fineness. The outlet size required can be adjusted, as there are different sizes of screens available to ensure more flexible production. The final product after our rubber granulator will be 99.9% rubber crumb without fiber and wire.
√ Waste tires: car tires, truck tires, OTR tires, etc.
√ Waste rubber: used V belt, rubber mat, rubber products, etc.
Car Tire
OTR Tire
Truck Tire
Waste Rubber Products
Application of Rubber Crumbs
1. Reclaimed rubber. It can be used to make rubber products, rubber mats, insulation materials, seals, rubber tubes, etc. Each application has different requirements for particle size and purity.
2. Modified asphalt. The road and playground using modified asphalt is flat and non-slip, has low noise, good drainage, reduces road maintenance and reduces costs.
3. Pyrolysis Oil. It is widely used as a fuel oil with high calorific value.
4. Alternative fuels. It is used in cement plants and power plants to reduce production costs, reduce carbon emissions, and promote the recycling of resources.
1. The advanced knife design is energy-efficient, reducing heat and wear, resharpenable and reusable.
2. The rotor is constructed of hardened steel and every exposed area inside the cutting chamber is fitted with a replaceable wear liner.
3. The main bearings are located on the exterior of the machine eliminating any chance of contamination.
4. The knives and screens are easily inspect and replace through hydraulically powered access doors.
| Model | JLSP800 | JLSP1000 | JLSP1200 | JLSP1500 |
| Main motor | 55kw | 75kw | 90kw | 110kw |
| Rotor diameter | 600mm | 600mm | 700mm | 700mm |
| blade | Made of H13, solid blade | |||
| Hydraulic station | 2.2kw | 2.2kw | 3kw | 3kw |
| Self-discharge belt conveyor | 2.2kw | 2.2kw | 3kw | 3kw |
| Screen hole size | Dia.3-7mm | |||
| Dimensions | 3.35*1.65*2.95m | 3.25*1.85*2.95m | 2.7*2.05*3.45m | 2.7*2.4*3.45m |
